|  |  | | | DESCRIPTION:
CITGO CITGARDŽ 500 Motor Oils are high quality, heavy-duty crankcase oils. Manufactured with newest additive technology, these oils provide superior performance in both diesel and gasoline engine service, including turbocharged engines. Designed to effectively combat sludge and varnish formation in the new high-output, low-emission engine designs, these products are formulated to meet heavy-duty truck, agricultural and construction equipment requirements. This is accomplished with a total base number of 8.1 and less than 1% sulfated ash. The viscosity modifier used in multigrades has excellent shear stability to assure that they stay in grade. The viscosity modifier also provides the high-temperature/high-shear rate viscosity necessary to protect vital moving parts such as piston rings and bearings, especially at high operating temperatures. CITGARDŽ 500 Motor Oils are the lubricants of choice for mixed fleets operating on either diesel or gasoline equipment. PERFORMANCE BENEFITS: - Excellent detergent control of piston ring deposits in highly stressed engines.
- Excellent fuel soot dispersency and oxidation resistance to protect against excessive oil viscosity increase.
- Superior wear protection and friction reduction.
- Excellent high-temperature/high-shear rate viscosity without sacrificing low-temperature viscosity.
- Excellent TBN retention to prevent corrosion wear.
- Proven oil consumption control in heavy-duty service.
- Fuel economy benefits (multigrades).
- Excellent water tolerance. Meet Fleetguard and GMC filterability requirements.
- Meet manufacturers' warranty requirements.
- Excellent shear stability to assure stay-in-grade performance (multigrades).
PERFORMANCE CAPABILITIES: | | | Caterpillar CD/TO-2
Cummins Heavy-Duty B and C
engines
Detroit Diesel 2- and 4-cycle
Ford M2C153-E; M2C171-B
GMC 6085M, 6094M
Cummings CES 20071 | Allison C-4
Mack EO-M, EO-L Plus and EO-L
Navistar International
Volvo VDS
U.S. CID A-A-52306 and 52039A |
| | | | *Some performance capabilities are applicable to specific viscosity grade(s). CITGARD is a registered trademark of CITGO Petroleum Corporation. | | | APPLICATIONS:
CITGARDŽ 500 Motor Oils are intended for use in heavy-duty service in commercial trucks, agricultural equipment, construction equipment, buses, stationary engines and other diesel engine applications. They also provide outstanding service in gasoline engines in passenger cars, light trucks, off-road vehicles, recreational vehicles and other heavy-duty gasoline engine applications. The multi-viscosity grades provide fuel economy benefits over single viscosity grades and permit year-round use in most areas by improving cold starting with full lubricating protection at high operating temperatures - important in heavily loaded, high-output engines. Specific viscosity grades are approved for use in powershift, manual and hydrostatic transmissions, final drives, and hydraulic systems where the equipment manufacturer designates the use of a heavy-duty, detergent type motor oil. | | | | | | TYPICAL PROPERTIES:
CITGARDŽ 500 MOTOR OILS | | | | | SAE Grade | 10W-30 | 15W-40 | 10W | 20W-20 | 30 | 40 | 50 | | | | | | | | | | | Code | 22310 | 22315 | 22401 | 22402 | 22403 | 22404 | 22405 | | | | | | | | | | | Gravity, ASTM D 287, °API | 29.7 | 28.8 | 30 | 28.5 | 28 | 27.5 | 27 | | Pounds Per Gallon | 7.3 | 7.4 | 7.3 | 7.4 | 7.4 | 7.4 | 7.4 | | Flash Point, COC, °F(°C) | 417
(214) | 428
(220) | 417
(214) | 457
(236) | 495 (258) | 478 (248) | 510 (266) | | Viscosity, ASTM D 5293 (CCS) cP at -20° C | 3090 | ------ | 2540 | ------ | ------ | ------ | ------ | cP at - 15°C
(CSS) | ------ | 3140 | ------ | ------ | ------ | ------ | ------ | cP at - 10°C
(CCS) | ------ | ------ | ------ | 1900 | ------ | ------ | ------ | | Viscosity, ASTM D 4684 (MRV), cP at °C | 21,700 @ -30°C | 20,100 @ -25°C | 18,000 @ - 30°C | 17,000 @ -20°C | ------ | ------ | ------ | | Yield Stress, ASTM D4684 (MRV), at °C, per SAE J300 | <35 | <35 | <35 | <35 | ------- | ------ | ------ | | Viscosity, ASTM D 445, cSt at 40°C | 75 | 122 | 39 | 66 | 105 | 147 | 217 | | cSt at 100°C | 11.3 | 15.2 | 6.6 | 9 | 12 | 14.9 | 19.4 | ASTM D 2161,
SUS at
100°F | 390 | 631 | 200 | 340 | 547 | 770 | 1145 | | SUS at 210°F | 64 | 80 | 48 | 56 | 68 | 79 | 98 | | Viscosity Index, ASTM D 2270 | 136 | 129 | 122 | 110 | 104 | 101 | 101 | | Pour Point, ASTM D 97, °F(°C) | -27 (-33) | -27 (-33) | -27 (-33) | -27 (-33) | -22 (-30) | +5 (-15) | +5 (-15) | | Sulfated Ash, ASTM D 874, m% | 0.9 | 0.9 | 0.9 | .09 | 0.9 | 0.9 | 0.9 | | Total Base No. (TBN), ASTM D 2896 | 8.1 | 8.1 | 8.1 | 8.1 | 8.1 | 8.1 | 7.8 | | Color, ASTM D 1500 | 2.5 | 2.5 | 2.5 | 2.5 | 3.0 | 3.5 | 4.5 | HTHS Rate Viscosity
at 150°C, cP | 3.3 | 4.2 | 2.3 | 3.0 | 3.7 | 4.4 | 5.5 | | | | | | | | | | | Mack EO-M | | X | | | | | | | Mack EO-L Plus | | X | | | | | | | Mack EO-L | X | X | | | | | | | Volvo VDS | | X | | | | | | | U.S. CID A-A-52306 | | X | | | X | X | | | U.S. CID A-A-52039A | X | | | | | | | | | | | | | | | | | API Service Categories | | | | | | | | | CH-4 | X | X | | | | | | | CG-4 | X | X | | | | | | | CF-4 | X | X | | | | | | | CF-2 | | X | | | X | X | X | | CF | X | X | X | X | X | X | X | | CE | X | X | | | X | X | | | CD | X | X | X | X | X | X | X | | SJ | (1) | X | | X | X | X | X | | SH | X | X | X | X | X | X | X |
| | | NOTE:
(1) meets all API SJ requirements except for the phosphorus limitation. |
Ask Rick |
