INDUSTRIAL VCI COATING DESCRIPTIONSProven VCI temporary heavy duty outdoor barrier corrosion protection coating provides 1 to 5 years corrosion protection to bare metal parts or painted surfaces. Apply to clean or rusted metal surfaces to give superior VCI protection, including water and salt spray resistance. Dries to a firm dry to touch clear corrosion protective coating. Can be removed with many common water based degreasers. Package: 5 gallons or 55 gallon drums
Corrosion protective coating designed to protect metals when exposed to outdoor weather conditions and for general purpose preservation, indoor or outdoor, with or without cover, for domestic and overseas shipment where a "dry to touch" film is required. Can be removed with a degreasing wash, steam or common industrial wax remover. Black color dry to touch temporary coating Salt Spray 336 hours; humidity cabinet 1200 hours Package: 5 gallons or 55 gallon drums
Daubert VCI Nox-Rust 4101 is designed specifically for acid fume inhibition such as in pickling operations and where corrosion protection storage of bare metals in a high humidity environment is required. Passes Ford and Armco Steel Corp tests. Package: 5 gallons or 55 gallon drums
Solvent-based barrier coating that provides extended, outdoor multi-metal protection. Semi-dry, translucent, self-healing, and scratch resistant film. Dilutable. Spray, roll, brush, or dip. Remove with common solvents. Conforms to MIL-C-16173D Grade 1. Package: 12 oz. (0.33 liters) aerosol
Oil-based barrier coating that provides extended, outdoor multi-metal protection. Tacky, translucent, self-healing, and scratch resistant wet film. Dilutable. Spray, roll, brush, or dip. Remove with alkaline cleaners and common solvents. Conforms to MIL-C-16173D Grade 2. Low V.O.C. Package: 12 oz. (0.33 liters) aerosol, 5 gallons (19 liters), and 55 gallons (208 liters)
Liquid oil based lubricant and corrosion preventative, General Motors spec 998-1833 and Ford Spec M4B90A approved. Provides exceptional performance when applied @0.5 mil thick as a coating or when used as a forming lubricant. Humidity Cabinet, Stack Tests and Zincrometal test results 500+ hours without incidence of corrosion. Passes Ford Motor Company Acid Atmosphere Test BJ7-J. Leaves an oily, non-drying, non-drip finish @ 0.5 mil thick. Easily removed with conventional methods Package: 5 gallons (19 liters) and 55 gallons (208 liters) drums.
Water-based, air-dry, permanent, hard barrier coating that provides extended outdoor protection for multi-metals. Available in colors and as clear coat. Provides up to three times the protection of similar corrosion control water based VCI coatings. Package: 5 gallons (19 liters) and 55 gallons (208 liters)
Can be used on bare metal parts or industrial finishes to provide corrosion protection. Water based easy to use metal corrosion control available in 5 gallons or 55 gallons. Very thin, very clear coating
A high-build, water-based, self-priming coating that provides extended outdoor corrosion protection. Color: Haze Gray Package: 5 gallons (19 liters) and 55 gallons (208 liters)
VCI temporary transparent, non-discernable coating leaves parts with a shiny luster. In most cases the film does not require removal. Provides temporary indoor corrosion protection for parts stored indoors and up to 3 - 5 years corrosion control when combined with VCI packaging. Repels water from metal surfaces. Can be removed with common water based degreasers such as our Vappro 800 Package: 5 gallons or 55 gallon drums
Excellent oil-based rust preventive in outdoor covered (sheltered exposures) Removable. Custom colors available. Dilutable and Non-polluting. Package: 5 gallons (19 liters) and 55 gallons (208 liters)
Provides up to six months indoor exposed corrosion protection Fed Spec VV-L-800 When packaged or used for enclosed components will give as much as 12 months
protection against corrosion Nox-Rust 7800 differs from ordinary corrosion preventive liquids in that it is
also an excellent lubricant for fine components even at very low temperatures
Coverage 2,000 sq. ft. per gallon, Viscosity SUS @ 100°F 66-70, Pour Point - 70 F
Additional Corrosion Control Coatings and products can be found at our sister site Corrosion Control Corrosion Protection VCI Products Store VCI Packaging VCI Paper VCI PowderNeed help with your corrosion inhibitor selection? Click here --> [ Home ] [ REQUEST QUOTES ] [ VCI Works ] [ Applications ] [ NEWS ] [ Rust Protection ] [ Rust Removing ] [ Save Money ] [ VCI Paper ] [ VCI Corrosion Protection ] [ Hydrotesting ] [ Coatings ] [ Military Specs ] [ Electrical ] [ Catalogs ] [ VCI Packaging ] [ VCI Film ] [ VCI Stretch Film ] [ VCI Powder Corrosion Inhibitors ] [ Additives ] [ Product Index ] [ VCI PLASTICS ] [ Food Grade ] [ Applications ] [ VCI Selection Help ] [ VCI Emitters ] [ VCI Foam Inserts ] [ Photo Gallery ] [ NDT F.D. Test Kit ] [ Payment Terminal ] [ Silver Guard ] [ Online VCI Store ] | 
