Hydrotesting Additives

VCI Corrosion Inhibitor products available for purchase from Kpr Adcor Inc. Facilities are ISO9002 Compliant

KPR ADCOR INC

For assistance with your hydro testing additives and corrosion control for water systems and lay up by email, click on the blue button and fill out our information form:

Buy Water Treatment Here --> Water Treatment Store

Fresh Water Hydrotesting Additives Typical Uses
Product	Application Rate	Metals Protected	Term of Corrosion Protection
V-848	0.5 % by Weight	multi-metal	up to two weeks
V-848	1.0 % to 2.0 % by Weight	Non Ferrous & Ferrous Metals	6 Months to 12 Months

Nox-Rust 1200	1:10 dilution with water	ferrous, aluminum, galvanized steel	up to 6 months

VCI-1 Powder	0.25% to 0.5% by weight	ferrous, aluminum, galvanized steel	up to one month
VCI-1 Powder	1.0 % to 2.0 %	ferrous, aluminum, galvanized steel	6 months to 12 months +

VCI-1010	0.25 % to 2.0 %	ferrous, aluminum, galvanized steel in the presence of non-ferrous metals	2 Weeks to 12 months +
Hydrotesting Additives For Brines (TDS below 0.5%, Cl- concentration <0.1%)
Product	Application Rate	Metals Protected	Term of Corrosion Protection
VCI-644	0.2% by weight	multimetal*	up to one month

VCI-1 Powder	1.0 % to 2.0 %	ferrous, aluminum, galvanized steel	6 Months to 12 Months
VCI-1 Powder	2.0 % to 3.0%	ferrous, aluminum, galvanized steel	12 Months to 2 years
VCI-1010	2.0 % to 3.0 %	ferrous, aluminum, galvanized steel in the presence of non-ferrous metals	6 Months to 2 Years
V-848	0.5 % by Weight	multi-metal	Up to 30 days
	1 %	multi-metal	Up to 6 Months
	2%	multi-metal	12 Months +
Sea Water Hydrotesting Additives
Product	Application Rate	Metals Protected	Term of Corrosion Protection
VCI-644	0.3% by weight	multimetal*	up to one week
	0.5-2.0% by weight	multimetal*	one month +

VCI-645	0.75% by weight	multimetal*	up to one month


Hydrotesting Product Concentrations for Cast Iron
VCI-1 Powder	1 - 3% by weight	Dissolve 1 to 3 % in water	Also good for submerged metals

VCI-1200	1:8 to 1:10 dilution in H₂O		Also good for submerged metals

VCI-644	0.5% by weight

V-848	2% - 3%	Dissolve in water	VCI-1 Powder is Recommended for Cast Iron
**Please note: VCI-1 Powder solutions can be reused in all cases, provided the concentration level of each is adequate before reuse of the solution. For Preservation in excess of 12 months it is recommended to follow hydrotesting with an additional method of corrosion protection such as applying corrosion inhibitor powder by dry fogging or additional methods.